Create a new shadow CIB. The live cluster configuration and status is copied to the shadow CIB. Specify withstatus if you want to edit the status section of the shadow CIB (see the cibstatus section). Add force to force overwriting the existing shadow CIB.

To start with an empty configuration that is not copied from the live CIB, specify the empty keyword. (This also allows a shadow CIB to be created in case no cluster is running.)

Usage:

Delete an existing shadow CIB.

Usage:

Copy the current cluster configuration into the shadow CIB.

Usage:

Apply a shadow CIB to the cluster.

Usage:

Choose a CIB source. If you want to edit the status from the shadow CIB specify withstatus (see cibstatus). Leave out the CIB name to switch to the running CIB.

Usage:

Print differences between the current cluster configuration and the active shadow CIB.

Usage:

List existing shadow CIBs.

Usage:

At times it may be useful to create a shadow file from the existing CIB. The CIB may be specified as file or as a PE input file number. The shell will look up files in the local directory first and then in the PE directory (typically /var/lib/pengine). Once the CIB file is found, it is copied to a shadow and this shadow is immediately available for use at both configure and cibstatus levels.

If the shadow name is omitted then the target shadow is named after the input CIB file.

Note that there are often more than one PE input file, so you may need to specify the full name.

Usage:

Examples:

Enter edit and manage the CIB status section level. See the CIB status management section.

Print all resource agents' classes and, where appropriate, a list of available providers.

Usage:

List available resource agents for the given class. If the class is ocf, supply a provider to get agents which are available only from that provider.

Usage:

Example:

Show the meta-data of a resource agent type. This is where users can find information on how to use a resource agent. It is also possible to get information from some programs: pengine, crmd, cib, and stonithd. Just specify the program name instead of an RA.

Usage:

Example:

List providers for a resource agent type. The class parameter defaults to ocf.

Usage:

Example:

Print resource status. If the resource parameter is left out status of all resources is printed.

Usage:

Start a resource by setting the target-role attribute. If there are multiple meta attributes sets, the attribute is set in all of them. If the resource is a clone, all target-role attributes are removed from the children resources.

For details on group management see options manage-children.

Usage:

Stop a resource using the target-role attribute. If there are multiple meta attributes sets, the attribute is set in all of them. If the resource is a clone, all target-role attributes are removed from the children resources.

For details on group management see options manage-children.

Usage:

Restart a resource. This is essentially a shortcut for resource stop followed by a start. The shell is first going to wait for the stop to finish, that is for all resources to really stop, and only then to order the start action. Due to this command entailing a whole set of operations, informational messages are printed to let the user see some progress.

For details on group management see options manage-children.

Usage:

Example:

Promote a master-slave resource using the target-role attribute.

Usage:

Demote a master-slave resource using the target-role attribute.

Usage:

Manage a resource using the is-managed attribute. If there are multiple meta attributes sets, the attribute is set in all of them. If the resource is a clone, all is-managed attributes are removed from the children resources.

For details on group management see options manage-children.

Usage:

Unmanage a resource using the is-managed attribute. If there are multiple meta attributes sets, the attribute is set in all of them. If the resource is a clone, all is-managed attributes are removed from the children resources.

For details on group management see options manage-children.

Usage:

Migrate a resource to a different node. If node is left out, the resource is migrated by creating a constraint which prevents it from running on the current node. Additionally, you may specify a lifetime for the constraint---once it expires, the location constraint will no longer be active.

Usage:

Remove the constraint generated by the previous migrate command.

Usage:

Show/edit/delete a parameter of a resource.

Usage:

Example:

Sensitive parameters can be kept in local files rather than CIB in order to prevent accidental data exposure. Use the secret command to manage such parameters. stash and unstash move the value from the CIB and back to the CIB respectively. The set subcommand sets the parameter to the provided value. delete removes the parameter completely. show displays the value of the parameter from the local file. Use check to verify if the local file content is valid.

Usage:

Example:

Show/edit/delete a meta attribute of a resource. Currently, all meta attributes of a resource may be managed with other commands such as resource stop.

Usage:

Example:

Show/edit/delete a utilization attribute of a resource. These attributes describe hardware requirements. By setting the placement-strategy cluster property appropriately, it is possible then to distribute resources based on resource requirements and node size. See also node utilization attributes.

Usage:

Example:

Show/edit/delete the failcount of a resource.

Usage:

Example:

Cleanup resource status. Typically done after the resource has temporarily failed. If a node is omitted, cleanup on all nodes. If there are many nodes, the command may take a while.

Usage:

Refresh CIB from the LRM status.

Usage:

Probe for resources not started by the CRM.

Usage:

Start tracing RA for the given operation. The trace files are stored in $HA_VARLIB/trace_ra. If the operation to be traced is monitor, note that the number of trace files can grow very quickly.

Usage:

Example:

Stop tracing RA for the given operation.

Usage:

Example:

Show nodes' status as XML. If the node parameter is omitted then all nodes are shown.

Usage:

Show a node definition. If the node parameter is omitted then all nodes are shown.

Usage:

Set a node to standby status. The node parameter defaults to the node where the command is run. Additionally, you may specify a lifetime for the standby---if set to reboot, the node will be back online once it reboots. forever will keep the node in standby after reboot.

Usage:

Set a node to online status. The node parameter defaults to the node where the command is run.

Usage:

Set the node status to maintenance. This is equivalent to the cluster-wide maintenance-mode property but puts just one node into the maintenance mode. The node parameter defaults to the node where the command is run.

Usage:

Set the node’s maintenance status to off. The node should be now again fully operational and capable of running resource operations.

Usage:

Make CRM fence a node. This functionality depends on stonith resources capable of fencing the specified node. No such stonith resources, no fencing will happen.

Usage:

Resets and clears the state of the specified node. This node is afterwards assumed clean and offline. This command can be used to manually confirm that a node has been fenced (e.g., powered off).

Be careful! This can cause data corruption if you confirm that a node is down that is, in fact, not cleanly down - the cluster will proceed as if the fence had succeeded, possibly starting resources multiple times.

Usage:

Delete a node. This command will remove the node from the CIB and, in case the cluster stack is running, use the appropriate program (crm_node or hb_delnode) to remove the node from the membership.

If the node is still listed as active and a member of our partition we refuse to remove it. With the global force option (-F) we will try to delete the node anyway.

Usage:

Edit node attributes. This kind of attribute should refer to relatively static properties, such as memory size.

Usage:

Example:

Edit node utilization attributes. These attributes describe hardware characteristics as integer numbers such as memory size or the number of CPUs. By setting the placement-strategy cluster property appropriately, it is possible then to distribute resources based on resource requirements and node size. See also resource utilization attributes.

Usage:

Examples:

Edit node attributes which are in the CIB status section, i.e. attributes which hold properties of a more volatile nature. One typical example is attribute generated by the pingd utility.

Usage:

Example:

Tickets are cluster-wide attributes. They can be managed at the site where this command is executed.

It is then possible to constrain resources depending on the ticket availability (see the rsc_ticket command for more details).

Usage:

Example:

Based on the skill-level setting, the user is allowed to use only a subset of commands. There are three levels: operator, administrator, and expert. The operator level allows only commands at the resource and node levels, but not editing or deleting resources. The administrator may do that and may also configure the cluster at the configure level and manage the shadow CIBs. The expert may do all.

Usage:

Sufficient privileges are necessary in order to manage a cluster: programs such as crm_verify or crm_resource and, ultimately, cibadmin have to be run either as root or as the CRM owner user (typically hacluster). You don’t have to worry about that if you run crm as root. A more secure way is to run the program with your usual privileges, set this option to the appropriate user (such as hacluster), and setup the sudoers file.

Usage:

Example:

The edit command invokes an editor. Use this to specify your preferred editor program. If not set, it will default to either the value of the EDITOR environment variable or to one of the standard UNIX editors (vi,emacs,nano).

Usage:

Example:

The view command displays text through a pager. Use this to specify your preferred pager program. If not set, it will default to either the value of the PAGER environment variable or to one of the standard UNIX system pagers (less,more,pg).

crm by default sorts CIB elements. If you want them appear in the order they were created, set this option to no.

Usage:

Example:

In normal operation, crm runs a command and gets back immediately to process other commands or get input from the user. With this option set to yes it will wait for the started transition to finish. In interactive mode dots are printed to indicate progress.

Usage:

Example:

crm can adorn configurations in two ways: in color (similar to for instance the ls --color command) and by showing keywords in upper case. Possible values are plain, color, and uppercase. It is possible to combine the latter two in order to get an upper case xmass tree. Just set this option to color,uppercase.

With output set to color, a comma separated list of colors from this option are used to emphasize:

crm can show colors only if there is curses support for python installed (usually provided by the python-curses package). The colors are whatever is available in your terminal. Use normal if you want to keep the default foreground color.

This user preference defaults to yellow,normal,cyan,red,green,magenta which is good for terminals with dark background. You may want to change the color scheme and save it in the preferences file for other color setups.

Example:

Semantic check of the CIB or elements modified or created may be done on every configuration change (always), when verifying (on-verify) or never. It is by default set to always. Experts may want to change the setting to on-verify.

The checks require that resource agents are present. If they are not installed at the configuration time set this preference to never.

See Configuration semantic checks for more details.

Semantic check of the CIB or elements modified or created may be done in the strict mode or in the relaxed mode. In the former certain problems are treated as configuration errors. In the relaxed mode all are treated as warnings. The default is strict.

See Configuration semantic checks for more details.

The shell (as in /bin/sh) parser strips quotes from the command line. This may sometimes make it really difficult to type values which contain white space. One typical example is the configure filter command. The crm shell will supply extra quotes around arguments which contain white space. The default is yes.

Some resource management commands, such as resource stop, when the target resource is a group, may not always produce desired result. Each element, group and the primitive members, can have a meta attribute and those attributes may end up with conflicting values. Consider the following construct:

Even though the element svc should be stopped, the group is actually running because all its members have the target-role set to Started:

Hence, if the user invokes resource stop svc the intention is not clear. This preference gives the user an opportunity to better control what happens if attributes of group members have values which are in conflict with the same attribute of the group itself.

Possible values are ask (the default), always, and never. If set to always, the crm shell removes all children attributes which have values different from the parent. If set to never, all children attributes are left intact. Finally, if set to ask, the user will be asked for each member what is to be done.

Display all current settings.

Save current settings to the rc file ($HOME/.config/crm/rc). On further crm runs, the rc file is automatically read and parsed.

This command resets all user options to the defaults. If used as a single-shot command, the rc file ($HOME/.config/crm/rc) is reset to the defaults too.

The node command describes a cluster node. Nodes in the CIB are commonly created automatically by the CRM. Hence, you should not need to deal with nodes unless you also want to define node attributes. Note that it is also possible to manage node attributes at the node level.

Usage:

Example:

The primitive command describes a resource. It may be referenced only once in group, clone, or master-slave objects. If it’s not referenced, then it is placed as a single resource in the CIB.

Operations may be specified in three ways. "Anonymous" as a simple list of "op" specifications. Use that if you don’t want to reference the set of operations elsewhere. That’s by far the most common way to define operations. If reusing operation sets is desired, use the "operations" keyword along with the id to give the operations set a name and the id-ref to reference another set of operations.

Operation’s attributes which are not recognized are saved as instance attributes of that operation. A typical example is OCF_CHECK_LEVEL.

For multistate resources, roles are specified as role=<role>.

A template may be defined for resources which are of the same type and which share most of the configuration. See rsc_template for more information.

Usage:

Example:

Monitor is by far the most common operation. It is possible to add it without editing the whole resource. Also, long primitive definitions may be a bit uncluttered. In order to make this command as concise as possible, less common operation attributes are not available. If you need them, then use the op part of the primitive command.

Usage:

Example:

Note that after executing the command, the monitor operation may be shown as part of the primitive definition.

The group command creates a group of resources. This can be useful when resources depend on other resources and require that those resources start in order on the same node. A commmon use of resource groups is to ensure that a server and a virtual IP are located together, and that the virtual IP is started before the server.

Grouped resources are started in the order they appear in the group, and stopped in the reverse order. If a resource in the group cannot run anywhere, resources following it in the group will not start.

group can be passed the "container" meta attribute, to indicate that it is to be used to group VM resources monitored using Nagios. The resource referred to by the container attribute must be of type ocf:heartbeat:Xen, oxf:heartbeat:VirtualDomain or ocf:heartbeat:lxc.

Usage:

Example:

The clone command creates a resource clone. It may contain a single primitive resource or one group of resources.

Usage:

Example:

The ms command creates a master/slave resource type. It may contain a single primitive resource or one group of resources.

Usage:

Example:

The rsc_template command creates a resource template. It may be referenced in primitives. It is used to reduce large configurations with many similar resources.

Usage:

Example:

location defines the preference of nodes for the given resource. The location constraints consist of one or more rules which specify a score to be awarded if the rule matches.

Usage:

Examples:

This constraint expresses the placement relation between two or more resources. If there are more than two resources, then the constraint is called a resource set.

The score is used to indicate the priority of the constraint. A positive score indicates that the resources should run on the same node. A negative score that they should not run on the same node. Values of positive or negative infinity indicate a mandatory constraint.

In the two resource form, the cluster will place <with-rsc> first, and then decide where to put the <rsc> resource.

Collocation resource sets have an extra attribute (sequential) to allow for sets of resources which don’t depend on each other in terms of state. The shell syntax for such sets is to put resources in parentheses.

Sets cannot be nested.

The optional ‘node-attribute` references an attribute in nodes’ instance attributes.

Usage:

Example:

This constraint expresses the order of actions on two resources or more resources. If there are more than two resources, then the constraint is called a resource set.

Ordered resource sets have an extra attribute to allow for sets of resources whose actions may run in parallel. The shell syntax for such sets is to put resources in parentheses.

If the subsequent resource can start or promote after any one of the resources in a set has done, enclose the set in brackets ([ and ]).

Sets cannot be nested.

Three strings are reserved to specify a kind of order constraint: Mandatory, Optional, and Serialize. It is preferred to use one of these settings instead of score. Previous versions mapped scores 0 and inf to keywords advisory and mandatory. That is still valid but deprecated.

Usage:

Example:

This constraint expresses dependency of resources on cluster-wide attributes, also known as tickets. Tickets are mainly used in geo-clusters, which consist of multiple sites. A ticket may be granted to a site, thus allowing resources to run there.

The loss-policy attribute specifies what happens to the resource (or resources) if the ticket is revoked. The default is either stop or demote depending on whether a resource is multi-state.

See also the site set of commands.

Usage:

Example:

Set the cluster (crm_config) options.

Usage:

Example:

Set defaults for the resource meta attributes.

Usage:

Example:

If multiple fencing (stonith) devices are available capable of fencing a node, their order may be specified by fencing_topology. The order is specified per node.

Stonith resources can be separated by , in which case all of them need to succeed. If they fail, the next stonith resource (or set of resources) is used. In other words, use comma to separate resources which all need to succeed and whitespace for serial order. It is not allowed to use whitespace around comma.

If the node is left out, the order is used for all nodes. That should reduce the configuration size in some stonith setups.

Usage:

Example:

An ACL role is a set of rules which describe access rights to CIB. Rules consist of an access right read, write, or deny and a specification denoting part of the configuration to which the access right applies. The specification can be an XPath or a combination of tag and id references. If an attribute is appended, then the specification applies only to that attribute of the matching element.

There is a number of shortcuts for XPath specifications. The meta, params, and utilization shortcuts reference resource meta attributes, parameters, and utilization respectively. The location may be used to specify location constraints most of the time to allow resource move and unmove commands. The property references cluster properties. The node allows reading node attributes. nodeattr and nodeutil reference node attributes and node capacity (utilization). The status shortcut references the whole status section of the CIB. Read access to status is necessary for various monitoring tools such as crm_mon(8) (aka crm status).

Usage:

Example:

Users which normally cannot view or manage cluster configuration can be allowed access to parts of the CIB. The access is defined by a set of read, write, and deny rules as in role definitions or by referencing roles. The latter is considered best practice.

Usage:

Example:

Set defaults for the operations meta attributes.

Usage:

Example:

CIB’s content is validated by a RNG schema. Pacemaker supports several, depending on version. Currently supported schemas are pacemaker-1.0, pacemaker-1.1, and pacemaker-1.2.

Use this command to display or switch to another RNG schema.

Usage:

Example:

The show command displays objects. It may display all objects or a set of objects. The user may also choose to see only objects which were changed. Optionally, the XML code may be displayed instead of the CLI representation.

Usage:

This command invokes the editor with the object description. As with the show command, the user may choose to edit all objects or a set of objects.

If the user insists, he or she may edit the XML edition of the object. If you do that, don’t modify any id attributes.

Usage:

This command filters the given CIB elements through an external program. The program should accept input on stdin and send output to stdout (the standard UNIX filter conventions). As with the show command, the user may choose to filter all or just a subset of elements.

It is possible to filter the XML representation of objects, but probably not as useful as the configuration language. The presentation is somewhat different from what would be displayed by the show command---each element is shown on a single line, i.e. there are no backslashes and no other embelishments.

Don’t forget to put quotes around the filter if it contains spaces.

Usage:

Examples:

Delete one or more objects. If an object to be deleted belongs to a container object, such as a group, and it is the only resource in that container, then the container is deleted as well. Any related constraints are removed as well.

Usage:

This command takes the timeouts from the actions section of the resource agent meta-data and sets them for the operations of the primitive.

Usage:

Rename an object. It is recommended to use this command to rename a resource, because it will take care of updating all related constraints and a parent resource. Changing ids with the edit command won’t have the same effect.

If you want to rename a resource, it must be in the stopped state.

Usage:

Add or remove primitives in a group. The add subcommand appends the new group member by default. Should it go elsewhere, there are after and before clauses.

Usage:

Examples:

Refresh the internal structures from the CIB. All changes made during this session are lost.

Usage:

The erase clears all configuration. Apart from nodes. To remove nodes, you have to specify an additional keyword nodes.

Note that removing nodes from the live cluster may have some strange/interesting/unwelcome effects.

Usage:

Show PE (Policy Engine) motions using ptest(8) or crm_simulate(8).

A CIB is constructed using the current user edited configuration and the status from the running CIB. The resulting CIB is run through ptest (or crm_simulate) to show changes which would happen if the configuration is committed.

The status section may be loaded from another source and modified using the cibstatus level commands. In that case, the ptest command will issue a message informing the user that the Policy Engine graph is not calculated based on the current status section and therefore won’t show what would happen to the running but some imaginary cluster.

If you have graphviz installed and X11 session, dotty(1) is run to display the changes graphically.

Add a string of v characters to increase verbosity. ptest can also show allocation scores. utilization turns on information about the remaining capacity of nodes. With the actions option, ptest will print all resource actions.

The ptest program has been replaced by crm_simulate in newer Pacemaker versions. In some installations both could be installed. Use simulate to enfore using crm_simulate.

Usage:

Examples:

Test resources with current resource configuration. If no nodes are specified, tests are run on all known nodes.

The order of resources is significant: it is assumed that later resources depend on earlier ones.

If a resource is multi-state, it is assumed that the role on which later resources depend is master.

Tests are run sequentially to prevent running the same resource on two or more nodes. Tests are carried out only if none of the specified nodes currently run any of the specified resources. However, it won’t verify whether resources run on the other nodes.

Superuser privileges are obviously required: either run this as root or setup the sudoers file appropriately.

Note that resource testing may take some time.

Usage:

Examples:

Enter edit and manage the CIB status section level. See the CIB status management section.

The specified template is loaded into the editor. It’s up to the user to make a good CRM configuration out of it. See also the template section.

Usage:

Example:

Commit the current configuration to the CIB in use. As noted elsewhere, commands in a configure session don’t have immediate effect on the CIB. All changes are applied at one point in time, either using commit or when the user leaves the configure level. In case the CIB in use changed in the meantime, presumably by somebody else, the crm shell will refuse to apply the changes. If you know that it’s fine to still apply them add force.

Usage:

Verify the contents of the CIB which would be committed.

Usage:

If you get the CIB not supported error, which typically means that the current CIB version is coming from the older release, you may try to upgrade it to the latest revision. The command to perform the upgrade is:

If we don’t recognize the current CIB as the old one, but you’re sure that it is, you may force the command.

Usage:

Save the current configuration to a file. Optionally, as XML. Use - instead of file name to write the output to stdout.

Usage:

Example:

Load a part of configuration (or all of it) from a local file or a network URL. The replace method replaces the current configuration with the one from the source. The update tries to import the contents into the current configuration. The file may be a CLI file or an XML file.

Usage:

Example:

Create a graphviz graphical layout from the current cluster configuration.

Currently, only dot (directed graph) is supported. It is essentially a visualization of resource ordering.

The graph may be saved to a file which can be used as source for various graphviz tools (by default it is displayed in the user’s X11 session). Optionally, by specifying the format, one can also produce an image instead.

For more or different graphviz attributes, it is possible to save the default set of attributes to an ini file. If this file exists it will always override the builtin settings. The exportsettings subcommand also prints the location of the ini file.

Usage:

Example:

Even though we promissed no xml, it may happen, but hopefully very very seldom, that an element from the CIB cannot be rendered in the configuration language. In that case, the element will be shown as raw xml, prefixed by this command. That element can then be edited like any other. If the shell finds out that after the change it can digest it, then it is going to be converted into the normal configuration language. Otherwise, there is no need to use xml for configuration.

Usage:

Create a new configuration from one or more templates. Note that configurations and templates are kept in different places, so it is possible to have a configuration name equal a template name.

If you already know which parameters are required, you can set them directly on the command line.

The parameter name id is set by default to the name of the configuration.

Usage:

Examples:

Load an existing configuration. Further edit, show, and apply commands will refer to this configuration.

Usage:

Edit current or given configuration using your favourite editor.

Usage:

Remove a configuration. The loaded (active) configuration may be removed by force.

Usage:

List existing configurations or templates.

Usage:

Copy the current or given configuration to the current CIB. By default, the CIB is replaced, unless the method is set to "update".

Usage:

Process the current or given configuration and display the result.

Usage:

Load a status section from a file, a shadow CIB, or the running cluster. By default, the current (live) status section is modified. Note that if the live status section is modified it is not going to be updated if the cluster status changes, because that would overwrite the user changes. To make crm drop changes and resume use of the running cluster status, run load live.

All CIB shadow configurations contain the status section which is a snapshot of the status section taken at the time the shadow was created. Obviously, this status section doesn’t have much to do with the running cluster status, unless the shadow CIB has just been created. Therefore, the ptest command by default uses the running cluster status section.

Usage:

Example:

The current internal status section with whatever modifications were performed can be saved to a file or shadow CIB.

If the file exists and contains a complete CIB, only the status section is going to be replaced and the rest of the CIB will remain intact. Otherwise, the current user edited configuration is saved along with the status section.

Note that all modifications are saved in the source file as soon as they are run.

Usage:

Example:

Show the origin of the status section currently in use. This essentially shows the latest load argument.

Usage:

Show the current status section in the XML format. Brace yourself for some unreadable output. Add changed option to get a human readable output of all changes.

Usage:

Change the node status. It is possible to throw a node out of the cluster, make it a member, or set its state to unclean.

Usage:

Example:

Edit the outcome of a resource operation. This way you can tell CRM that it ran an operation and that the resource agent returned certain exit code. It is also possible to change the operation’s status. In case the operation status is set to something other than done, the exit code is effectively ignored.

Usage:

Example:

Set the quorum value.

Usage:

Example:

Modify the ticket status. Tickets can be granted and revoked. Granted tickets could be activated or put in standby.

Usage:

Example:

Run the policy engine with the edited status section.

Add a string of v characters to increase verbosity. Specify scores to see allocation scores also. utilization turns on information about the remaining capacity of nodes.

If you have graphviz installed and X11 session, dotty(1) is run to display the changes graphically.

Usage:

Example:

Run the policy engine with the edited status section and simulate the transition.

Add a string of v characters to increase verbosity. Specify scores to see allocation scores also. utilization turns on information about the remaining capacity of nodes.

If you have graphviz installed and X11 session, dotty(1) is run to display the changes graphically.

Usage:

Example:

The info command shows most important information about the cluster.

Usage:

Example:

The latest command shows a bit of recent history, more precisely whatever happened since the last cluster change (the latest transition). If the transition is running, the shell will first wait until it finishes.

Usage:

Example:

All history commands look at events within certain period. It defaults to the last hour for the live cluster source. There is no limit for the hb_report source. Use this command to set the timeframe.

The time period is parsed by the dateutil python module. It covers wide range of date formats. For instance:

We won’t bother to give definition of the time specification in usage below. Either use common sense or read the dateutil documentation.

If dateutil is not available, then the time is parsed using strptime and only the kind as printed by date(1) is allowed:

Usage:

Examples:

Events to be examined can come from the current cluster or from a hb_report report. This command sets the source. source live sets source to the running cluster and system logs. If no source is specified, the current source information is printed.

In case a report source is specified as a file reference, the file is going to be unpacked in place where it resides. This directory is not removed on exit.

Usage:

Examples:

This command makes sense only for the live source and makes crm collect the latest logs and other relevant information from the logs. If you want to make a completely new report, specify force.

Usage:

How much detail to show from the logs.

Usage:

Example:

In case the host this program runs on is not part of the cluster, it is necessary to set the list of nodes.

Usage:

Example:

Show actions and any failures that happened on all specified resources on all nodes. Normally, one gives resource names as arguments, but it is also possible to use extended regular expressions. Note that neither groups nor clones or master/slave names are ever logged. The resource command is going to expand all of these appropriately, so that clone instances or resources which are part of a group are shown.

Usage:

Example:

Show important events that happened on a node. Important events are node lost and join, standby and online, and fence. Use either node names or extended regular expressions.

Usage:

Example:

Show messages logged on one or more nodes. Leaving out a node name produces combined logs of all nodes. Messages are sorted by time and, if the terminal emulations supports it, displayed in different colours depending on the node to allow for easier reading.

The sorting key is the timestamp as written by syslog which normally has the maximum resolution of one second. Obviously, messages generated by events which share the same timestamp may not be sorted in the same way as they happened. Such close events may actually happen fairly often.

Usage:

Example:

If a log is infested with irrelevant messages, those messages may be excluded by specifying a regular expression. The regular expressions used are Python extended. This command is additive. To drop all regular expressions, use exclude clear. Run exclude only to see the current list of regular expressions. Excludes are saved along with the history sessions.

Usage:

Example:

Every event in the cluster results in generating one or more Policy Engine (PE) files. These files describe future motions of resources. The files are listed as full paths in the current report directory. Add v to also see the creation time stamps.

Usage:

Example:

This command will print actions planned by the PE and run graphviz (dotty) to display a graphical representation of the transition. Of course, for the latter an X11 session is required. This command invokes ptest(8) in background.

The showdot subcommand runs graphviz (dotty) to display a graphical representation of the .dot file which has been included in the report. Essentially, it shows the calculation produced by pengine which is installed on the node where the report was produced. In optimal case this output should not differ from the one produced by the locally installed pengine.

The log subcommand shows the full log for the duration of the transition.

A transition can also be saved to a CIB shadow for further analysis or use with cib or configure commands (use the save subcommand). The shadow file name defaults to the name of the PE input file.

If the PE input file number is not provided, it defaults to the last one, i.e. the last transition. The last transition can also be referenced with number 0. If the number is negative, then the corresponding transition relative to the last one is chosen.

If there are warning and error PE input files or different nodes were the DC in the observed timeframe, it may happen that PE input file numbers collide. In that case provide some unique part of the path to the file.

After the ptest output, logs about events that happened during the transition are printed.

Usage:

Examples:

Every transition is saved as a PE file. Use this command to render that PE file either as configuration or status. The configuration output is the same as crm configure show.

Usage:

Examples:

Create a graphviz graphical layout from the PE file (the transition). Every transition contains the cluster configuration which was active at the time. See also generate a directed graph from configuration.

Usage:

Example:

A transition represents a change in cluster configuration or state. Use diff to see what has changed between two transitions.

If you want to specify the current cluster configuration and status, use the string live.

Normally, the first transition specified should be the one which is older, but we are not going to enforce that.

Note that a single configuration update may result in more than one transition.

Usage:

Examples:

Sometimes you may want to get back to examining a particular history period or bug report. In order to make that easier, the current settings can be saved and later retrieved.

If the current history being examined is coming from a live cluster the logs, PE inputs, and other files are saved too, because they may disappear from nodes. For the existing reports coming from hb_report, only the directory location is saved (not to waste space).

A history session may also be packed into a tarball which can then be sent to support.

Leave out subcommand to see the current session.

Usage:

Examples: